Best Adhesive For Skirting Boards (MDF, Oak, PVC, Plastic & Hardwood)

Source

Skirting boards are used for many purposes; for example, they can be used as part of the house decoration, where they can be intricate or have moldings; these shapes can be seen in old houses. They can also be used for wall protection from wear, tear, and knocks from the furniture.

If you are installing skirting boards, you can use different methods such as screws and nails, normal adhesive, or foam adhesive. You have to choose a suitable adhesive if you are not using nails and screws. 

Here is a Best Adhesive For Skirting Boards (MDF, Oak, PVC, Plastic & Hardwood)

The best adhesive for MDF, Oak, PVC, Plastic & Hardwood skirting boards is Adiseal sealant & adhesive because it has a strong bonding and high gap fill. When sticking a skirting board to a wall, you will need a strong adhesive to ensure it has a tight bond and will last for a long period.

The Adiseal is the best option for installing skirting boards without using nails; when using adhesive to stick skirting boards, you should consider some factors before applying the adhesive to the wall; for example, you need to prepare the wall or the surface you are using. 

Prepare the Surface

The adhesive’s strength depends on the surface the adhesive is applied to, so if you are using the adhesive on a dusty surface, the adhesive will stick to the dust, making the adhesive bonding weaker.  You need to ensure that the surface is completely free of any grease, dust, or loose paint before applying the adhesive because if there is any debris on the surface, it will weaken the bonding of the adhesive.

If you are applying the adhesive to a wall that is not flat, you will need to flatten it as much as you can before applying the adhesive, and then if there are any gaps formed after you have flattened the wall, you can use an adhesive that has high gap fill. 

Flexible Adhesive

Wood expands and contracts over time due to environmental factors like heat and moisture; therefore, you need to use a flexible adhesive to prevent the bond from getting weaker and brittle. 

When the bond gets weaker, it will break, eventually causing the skirting boards to fall; in addition, skirting boards are objected to vibrations from people touching and walking beside them and the traffic near the house. 

Therefore, when using an adhesive to stick skirting boards, you need to ensure it’s flexible and will become brittle or weaker over time.

How To Install Skirting Boards Using Adhesive?

Prepare the Boards

Before sticking a skirting board to a wall, you need to acclimatize it to the new area; first, you can leave the boards for a few days in the room to ensure that the moisture doesn’t affect the board,  moisture can affect the board by making it wrap.

This can happen if the board is not stuck to the wall or they have been stuck, in addition, you need to make sure the side that will be stuck to the wall is clean from any dust or dirt to make sure it bonds well to the adhesive. 

Clean the Surface 

You need to ensure that the surface is completely free of any grease, dust, or loose paint before applying the adhesive because if there is any debris on the surface, it will weaken the bonding of the adhesive. The adhesive’s strength depends on the surface the adhesive is applied to, so if you are using the adhesive on a dusty surface, the adhesive will stick to the dust, making the adhesive bonding weaker. 

Apply the Adhesive

Open up the adhesive tube, and then apply it to the side facing the wall. To ensure complete coverage, you should use the zigzag method and move the adhesive tube over the board in a zigzag way, not in a straight line, this will cover more surfaces and ensure a better bonding.

A tube of adhesive should cover ten meters of skirting board; therefore, if the tube runs out quickly, you are using too much, and if the tube lasts longer than ten meters of wood, you are not using enough adhesive.

Stick the Board

The next step is to stick the board to the wall, lift the board after applying the adhesive, and then align the board properly. Stick the board to the wall and hold it for several minutes; the time required for the adhesive to set should be mentioned in the manufacturer’s instructions.

Use Support

You may need temporary support if the adhesive has not been set yet; you can use anything heavy and place it against the board to fix it in place until the adhesive is completely cured.

Source

Foam vs. Adhesive: Which is better for Skirting Boards?

When it comes to sticking skirting boards, the foam is better than the adhesive due to the easy foam removal when you want to remove the boards or replace them; however, the adhesive and the foam both have the same strength in bonding. 

The foam can be removed easily doesn’t mean that it has weaker bonding than the adhesive; the foam can be good as the adhesive in sticking skirting boards, according to many professionals. 

Adhesive

If you are not willing to use nails or screws, the adhesive is a great option when sticking skirting boards to walls; the adhesive offers a tight bonding between the skirting board and the wall.

The adhesive’s strength depends on the surface of the adhesive applied, so if you are using the adhesive on a dusty surface, the adhesive will stick to the dust, which makes the bonding of the adhesive weaker.

Foam

The foam adhesive is similar to the normal adhesive used to stick the skirting boards; they have the same strength in bonding to the wall; however, the foam is easier to remove than the adhesive.

You can easily remove foam adhesive by sliding a breadknife between the wall and the skirting, the breadknife will break the bonding between them, and the skirting will be free to remove; this protects the wall’s plaster. The bonding between the foam and the adhesive doesn’t break unless there is this a tool has been used to break it.

Can You Use Expanding Foam on Skirting Boards?

Expanding foam is a great alternative to the normal adhesive, and it can be used to stick skirting boards; the foam has the same strength in bonding to walls as the normal adhesive; they both bond tightly to the wall and the skirting board.

To use a foam adhesive to fix, you have to follow some procedures first:

  • Mist the skirting board wall will be fixed; you don’t have to mist the skirting board. 
  • Use a foam gun to have more control over the foam; use the gun to apply some foam beads to the skirting board.
  • Lift the board after applying the foam, and then align the board properly. Stick the board to the wall and hold it in place for several minutes; the time required for the foam to set should be mentioned in the manufacturer’s instructions.
  • You may need temporary support if the foam has not been set yet; you can use anything heavy and place it against the board to fix it in place until the foam is completely cured.

Conclusion

To sum up, the best adhesive to use when sticking skirting boards is the Adiseal sealant & adhesive because it has a high gap fill and tight bonding of the wall and the skirting board. 

When applying adhesive to stick skirting boards, some factors should be considered before applying the adhesive to the wall; for example, you need to prepare the wall or the surface you are using. 

The expanding foam can also be used when not using screws or nails to install the skirting boards; expanding foam has the same strength as the normal adhesive; however, the foam has easier installation and can also be easily removed.

Related Readings:

Does EMT Conduit Need To Be Grounded? Answered!

Can Landlord Paint House While Occupied? Answered

How To Remove Adhesive From Wood Without Damaging Finish

Does Electrical Wire Need To Be in Conduit? SOLVED

Scroll to Top